AmesPore® SSU stainless steel disc filters
The material used to produce these disc filters is AISI 316L or AISI 316 stainless steel. They are made by uniaxial compaction of powder in a rigid tool with the negative shape of the part, and then sintered. The pore size is adjusted by changing the compaction pressure and/or the particle size of the powder.
The diameter or width of these filters is determined by the tooling, while their height is adjustable from approximately 1.5mm to the maximum length indicated in the tables.
We have a variety of stainless steel filter discs in permanent stock that can be shipped within 24 hours. Please click the links to view our permanent stock or to view the different material grades that are available.
6,0 |
10,0 |
8,0 |
8,0 |
9,0 |
16,0 |
10,0 |
16,0 |
11,0 |
16,0 |
12,0 |
20,0 |
13,0 |
25,0 |
14,0 |
20,0 |
15,0 |
20,0 |
16,0 |
25,0 |
17,0 |
12,0 |
18,0 |
22,0 |
19,0 |
20,0 |
20,0 |
32,0 |
22,0 |
25,0 |
24,0 |
32,0 |
26,0 |
32,0 |
27,0 |
22,0 |
30,0 |
32,0 |
32,0 |
32,0 |
38,0 |
38,0 |
42,0 |
22,0 |
44,0 |
35,0 |
46,0 |
40,0 |
49,9 |
50,0 |
51,0 |
45,0 |
54,9 |
35,0 |
55,9 |
36,0 |
59,9 |
50,0 |
69,9 |
90,0 |
80,0 |
120,0 |
100,1 |
120,0 |
NOTE: General tolerance ±0,2mm as a guideline. Tolerances vary based on material grade and product dimensions. To assign tolerances, contact us at amespore.com.
*Different dimensions may be manufactured on demand.
Learn more about AMES here.

Reference
An AmesPore® porous sintered disc of 316L stainless steel with an average pore size of 27 μm, an outer diameter of 16 mm and a length of 3 mm is referred to as:
AmesPore® SSU25 D-16-3
(The letters SSU indicate uniaxially pressed stainless steel and the letter D indicates disc)
Would you need any information about AmesPore® SSU stainless steel disc filters?
AMES can create specific solutions of shapes, materials and performance in which the porosity of the sintered product is tailored to the applications.
Please, contact us and we will answer you as soon as possible.
Thank you!